Industrial Sealant

Hi-Temperature Silicone sealant is a one-part, moisture curing, RTV (room temperature vulcanizing) silicone that cures to form a tough rubber gasket. RTV high temp was specifically formulated to be used as a formed-in-place gasket where operating temperatures up to 310??C (600??F) are reached intermittently. high temperature silicone will remain permanently flexible and provides excellent resistance to aging, vibration and shock. TYPICAL USES The primary use for RTV high Temp high temp silicone is formed-in-place gaskets in high temperature applications to replace conventional paper and cork gaskets. Such uses include: Automotive ??? valve covers ??? axle housings ??? water and oil pump seals ??? thermostat housings ??? bearing cap seals ??? timing chain covers ??? fuel pumps to blocks ??? solenoid covers Industrial ??? pump and compressor gaskets ??? appliance door gaskets ??? humidifier gaskets ??? air conditioner gaskets ??? repairing torn silicone rubber sheets ??? ductwork gaskets ??? dust collection components ??? wire and cable insulation ??? furnace door gaskets DIRECTIONS high temperature silicone is ready to use and requires no mixing or additives. The cure mechanism begins as soon as the sealant comes in contact with the air. At conditions of 25??C (77??F) and 50% relative humidity, the sealant will skin in 10 minutes and cure within 24 hours (1/4 bead), ultimate cure in 7 days. SURFACE PREPARATION All surfaces should be clean and dry. It is recommended that bonding surfaces be solvent wiped with a naphtha, ketone or chlorinated solvent. Suitable solvents include xylol, toluol and mineral spirits. Do not solvent wipe with alcohols or oil-containing solvents such as Varsol. For gasket applications, apply an even bead, with a diameter of 1/8 or less, to one surface, making certain to surround all bolt holes. Press, do not slide parts together, and torque normally. On surfaces where adhesion is not desired, a light coat of oil or grease will act as a release agent. If removal of high temperature silicone is necessary, it can be wiped off surfaces to be mated when uncured. After the material cures, it can be abraded or scraped from the surface. High temp silicone is not recommended as a gasket for cylinders

Smart Bond WINDSHIELD Auto glass polyurethane windshield adhesive is a high modulus, one part, moisture-curing polyurethane sealant. this sealant formulated to be fast-curing and non-sagging for rapid result and a clean and simple application process. The features of this windshield adhesive prouduct high-strength material designed to bond and seal vehical windshield.

Gasket Silicone Sealant is good for almost all automotive /engine gasket requirement.

Smart bond RTV SOLAR/ LED-1000 is a moisture cure neutral silicone sealant . This product is equivalent to ANABOND-666 for many applications.

Product Details: Minimum Order Quantity: 96 Piece Usage/Application: Mirror,Bonding of all kinds of substrates Packaging Size: 300 ML Brand: SMART BOND Builder Sealant Density: 1.4 kg/Ltr Packaging Type: BOTTLE/ Sausage Usage: Industrial Physical State: Liquid Grade Standard: Industrial Grade Color: WHITE Builder Slant is a "Hybrid" sealant which is of increasing interest because they can be formulated to provide the best properties of two or more families of polymeric materials while limiting their individual inherent weaknesses. For example, a polyether or a polyurethane polymer can be terminated with silyl groups (related to silicone polymers) to yield a high performance sealant having many of the beneficial characteristics of both polyurethanes and silicones without many of the disadvantages. The main application for these materials is as sealants in the building and construction industry; Instant Bonding of Mirrors with wood, metal, cement, stone with Neutral Sealant, Bonding with almost all kind of substrate with instant bonding & structural strength. Hybrid sealants are claimed to combine the strength of polyurethanes with the weathering resistance of silicones. In addition to their high performance properties, these sealants are achieving popularity due to their solvent-free and isocyanate-free nature and due to their formulation versatility that allows the customization of viscosity and early strength development for various applications

Product Details: Minimum Order Quantity: 96 Piece Usage/Application: Mirror,Bonding of all kinds of substrates Packaging Size: 300 ML Brand: SMART BOND Builder Sealant Density: 1.4 kg/Ltr Packaging Type: BOTTLE/ Sausage Usage: Industrial Physical State: Liquid Grade Standard: Industrial Grade Color: WHITE Builder Slant is a "Hybrid" sealant which is of increasing interest because they can be formulated to provide the best properties of two or more families of polymeric materials while limiting their individual inherent weaknesses. For example, a polyether or a polyurethane polymer can be terminated with silyl groups (related to silicone polymers) to yield a high performance sealant having many of the beneficial characteristics of both polyurethanes and silicones without many of the disadvantages. The main application for these materials is as sealants in the building and construction industry; Instant Bonding of Mirrors with wood, metal, cement, stone with Neutral Sealant, Bonding with almost all kind of substrate with instant bonding & structural strength. Hybrid sealants are claimed to combine the strength of polyurethanes with the weathering resistance of silicones. In addition to their high performance properties, these sealants are achieving popularity due to their solvent-free and isocyanate-free nature and due to their formulation versatility that allows the customization of viscosity and early strength development for various applications

Builder Slant is a "Hybrid" sealant whih is of increasing interest because they can be formulated to provide the best properties of two or more families of polymeric materials while limiting their individual inherent weaknesses. For example, a polyether or a polyurethane polymer can be terminated with silyl groups (related to silicone polymers) to yield a high performance sealant having many of the beneficial characteristics of both polyurethanes and silicones without many of the disadvantages. The main application for these materials is as sealants in the building and construction industry; Instant Bonding of Mirrors with wood, metal, cement, stone with Neutral Sealant, Bonding with almost all kind of substrate with instant bonding & structural strength. Hybrid sealants are claimed to combine the strength of polyurethanes with the weathering resistance of silicones. In addition to their high performance properties, these sealants are achieving popularity due to their solvent-free and isocyanate-free nature and due to their formulation versatility that allows the customization of viscosity and early strength development for various applications Delivery Time : 1 week

Good for waterproofing joints at bathroom Sanitery wares including wash basins & toilets. 

Features :

• Solvent-, isocyanate- and PVC free.
• Very good UV-resistance and ageing properties.
• In general good adhesion on several substrates without the use of a primer.
• Permanent elastic within temperatures from ???40??C till +120??C.
• Neutral, odourless and fast curing.
• Paint compatible with most industrial paint-or lacquer systems,both alkyd resin and dispersion based (due to the large scale of different types of industrial paints a paint compatibility test is recommended).
• Paintable after skinforming (wetonwet) ;this will not influence the curing speed.

• Production Capacity: 1000 Box Per Day
• Delivery Time: 7Days
• Packaging Details: 24 PCs Per Box.

Smart Bond RTV MIRROR PRO is a best suitable product for Mirror application

high quality expansion joint silicone sealant with excellent rubber hardness & tensile strength to manage expansion of concrete due to weather changes. excellent temperature resistance.

Smart Bond RTV Acryflex -1200 Sealant is a one part, general-purpose, water-based low modulus RTV sealant. It is flexible and paintable.

Acrylic Sealant provides excellent adhesion to most surfaces. Its long lasting flexibility allows continuous expansion and construction without cracking or shrinking.
It is easy to apply and compatible with most materials used in construction e.g. concrete, wood, brick, natural and artificial stone, glass, metal and sanitary-ware.

2. Product Specification/Application

A.Can be widely used for sealing gaps and cracks prior to paint; perimeter sealing around window frames, architraves, skirting boards, picture and china rails; sealing around vanities and bath; internal corners of walls, cracks, joints and gaps where rigid fillers crack. B. High Performance Sealant can be used for jointing & sealing a variety
of building materials & construction elements that are likely to undergo moderate movement. C. Acrylic Sealant is suitable for repairing of cracks in walls, skirting boards, doors & windows and seals between plaster board panels, ceiling boards, cornices, & decorative ceiling panels.

3. Feature& benefits:-

A. Safe-Solvent free, water based.
B. Paintable.
C. Flexible without cracking.
D. Ideal for bathroom, shower room, kitchen. E. Easy to use - one part no mixing.
F. Environmental friendly, easily clean up with water.
G. Good weather ability and UV stability.
H. Excellent gun ability.
I. Good adhesion to wood, concrete, metal and marble without primer.

Builder Slant is a "Hybrid" sealant whih is of increasing interest because they can be formulated to provide the best properties of two or more families of polymeric materials while limiting their individual inherent weaknesses. For example, a polyether or a polyurethane polymer can be terminated with silyl groups (related to silicone polymers) to yield a high performance sealant having many of the beneficial characteristics of both polyurethanes and silicones without many of the disadvantages.

 

The main application for these materials is as sealants in the building and construction industry; Instant Bonding of Mirrors with wood, metal, cement, stone with Neutral Sealant, Bonding with almost all kind of substrate with instant bonding & structural strength.

 

Hybrid sealants are claimed to combine the strength of polyurethanes with the weathering resistance of silicones. In addition to their high performance properties, these sealants are achieving popularity due to their solvent-free and isocyanate-free nature and due to their formulation versatility that allows the customization of viscosity and early strength development for various applications

 

 

• Production Capacity: 600 Pcs Per day
• Delivery Time: 7 days
• Packaging Details: 24 PIECES PER BOX

Aquarium Silicone Sealant has been specifically formulated for the fabrication of fresh and salt-water aquariums. This high modulus component RTV Silicone Sealant forms strong cohesive bonds to glass without the need of primers. The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish. Aquarium Silicone Sealant is a non-slump sealant and can be applied to vertical surfaces without flowing or sagging. High Modulus Excellent tensile strength Excellent primerless adhesion to glass Bond unaffected by continuous immersion in water Excellent clarity

• Production Capacity: 1000 Boxes Per Day
• Delivery Time: 7days
• Packaging Details: 24 PCs Per Box

We offer excellent quality general purpose silicone sealant drum to our customers.

Typical Product Data:-

PROPERTY                                                        VALUE
METHOD                                                         Acetic 100%
TENSILE STRENGTH (PSI)                                   290
ELONGATION %                                                 300
SKIN TIME @ 25° C & 50% RH                          3-8minutes
CURE TIME 10MM @ 25°C & 50% RH                  5-7 days
OPERATING TEMPRATURE RANGE                    -60 to 205°C
SPECIFIC GRAVITY                                            0,92

• Production Capacity: 1000 Boxes Per days
• Delivery Time: 7 days
• Packaging Details: 24 Pcs Per Box

HVAC DUCT SEALANT

 

• Production Capacity: 1000 Boxes Per Day
• Delivery Time: 7days
• Packaging Details: 24 PCs Per Box

High temperature silicone adheisve specially designed for LED lights ballast , PCB sealing , diode fixing etc. The adheisve is non corrosive & resist from -50 degreeC to 250 degreeC

Smart Bond Windshield PU - 100 is a one component, high modulus sandable sealant. It is used for sealing for automotive windows, windshield assembly suitable for sealing in automotive car, bus, truck, ship, building and railway industries. Specially used for windshield, side glass of bus, car, ship, engineering machinery, vehicle carriage and special vehicle. It is also used for bonding glass, steel and plastic accessiories, car roof, side body and car front.

Product Details: Minimum Order Quantity: 96 Piece Usage/Application: Mirror,Bonding of all kinds of substrates Packaging Size: 300 ML Brand: SMART BOND Builder Sealant Density: 1.4 kg/Ltr Packaging Type: BOTTLE/ Sausage Usage: Industrial Physical State: Liquid Grade Standard: Industrial Grade Color: WHITE Builder Slant is a MS polymer based adhesive sealant which is of increasing interest because they can be formulated to provide the best properties of two or more families of polymeric materials while limiting their individual inherent weaknesses. For example, a polyether or a polyurethane polymer can be terminated with silyl groups (related to silicone polymers) to yield a high performance sealant having many of the beneficial characteristics of both polyurethanes and silicones without many of the disadvantages. The main application for these materials is as sealants in the building and construction industry; Instant Bonding of Mirrors with wood, metal, cement, stone with Neutral Sealant, Bonding with almost all kind of substrate with instant bonding & structural strength. MS polymer adhesive sealants are claimed to combine the strength of polyurethanes with the weathering resistance of silicones. In addition to their high performance properties, these sealants are achieving popularity due to their solvent-free and isocyanate-free nature and due to their formulation versatility that allows the customization of viscosity and early strength development for various applications

Product Details: Minimum Order Quantity: 96 Piece Usage/Application: Mirror,Bonding of all kinds of substrates Packaging Size: 300 ML Brand: SMART BOND Builder Sealant Density: 1.4 kg/Ltr Packaging Type: BOTTLE/ Sausage Usage: Industrial Physical State: Liquid Grade Standard: Industrial Grade Color: WHITE Builder Sealant is a "Hybrid" sealant whih is of increasing interest because they can be formulated to provide the best properties of two or more families of polymeric materials while limiting their individual inherent weaknesses. For example, a polyether or a polyurethane polymer can be terminated with silyl groups (related to silicone polymers) to yield a high performance sealant having many of the beneficial characteristics of both polyurethanes and silicones without many of the disadvantages. The main application for these materials is as sealants in the building and construction industry; Instant Bonding of Mirrors with wood, metal, cement, stone with Neutral Sealant, Bonding with almost all kind of substrate with instant bonding & structural strength. Hybrid sealants are claimed to combine the strength of polyurethanes with the weathering resistance of silicones. In addition to their high performance properties, these sealants are achieving popularity due to their solvent-free and isocyanate-free nature and due to their formulation versatility that allows the customization of viscosity and early strength development for various applications

PROPERTIES                           METHOD                   VALUE
Curing System                                                          Neutral
Appearance                              Visual                 Non-Sagging
Smell                                       Visual                    Odourless
Specific Gravity          Based on ASTM D 1475      1.46 +/-0.05
Hardness (Shore A)    Based on ASTM D 1475           26
Body Feeling              Based on ASTM D217           1.9cm
Viscosity ratio            Brookfield Viscometer            3.7
(2rpm/10 rpm using spindle 7)    
Elongation at Break      Based on ISO8339             >550%
Tensile at Break          Based on ISO8339               0.72MPa
Secant Modulus          Based on ISO8339               0.33 MPa
@23ºC AT 100% ELONGATION   
Application Temp.                    -                          5ºC to 30ºC
Service Temp.                         -                     -40ºC to 100ºC
Lap Sher Strength         Based on ASTM C961    0.84MPa
(Al. to Al.) 
Shielf Life                               -                       9 months                        

• Production Capacity: 1000 Boxes Per Day
• Delivery Time: 7days
• Packaging Details: 24 PCs Per Box

We AAA industries offer our client a good quality of Construction Expansion Joint Silicone Sealant mainly used for road construction expansion joint, building expansion joint

• Port of Dispatch: undefined

 

Specification:

• Production Capacity: 600 PCs Per Day
• Delivery Time: 7days
• Packaging Details: 50 PCs Per Box